Do you own an Enviroswim ES3 system? We welcome feedback from existing customers and those interested in alternative freshwater systems
Change Region: 
Enviroswim ES3 Pool System
Posted by: Enviroswim
Created on: Wed 14 December 2011 00:29
Last modified: Sat 17 December 2011 20:48
This article was posted in Enviroswim Products and tagged with blog
Social Networks
Benefits of working with us
- A true Eco Friendly system
- Low power consumption
- Eliminates chemical costs*
- Elimination of harmful chemicals
- Superior fresh water quality
- Recycled backwash water
- Includes natural minerals
Read More ››
Hi Natalie,
There is no problem using chlorine until you install the Enviroswim system. The information you have supplied does not make it clear as to what stage the pool will be left for twelve months. I would be very concerned if the pool has the finished surface on and is to be left without the pump, filter and Enviroswim connected and working. I assume the builder is referring to leaving the shell for 12 month prior to putting the final finish on when the house is built.
The in floor system has been great but ozone was a disater and over 9 moths it drove me nut and cost a fortune in chemicals. After my wife constantly telling me "I told you to go with another Ionizer" I relented and brought an ES3.
Since installing it and flicking the switch its been a outstanding success with nothing more the hardness adjustments (concrete pool).
I won't be changing again!
We have had the ES-3 system for 3 years now and have been very pleased with its performance. We love that we no longer need chlorine or salt in the pool and it has stayed crystal clear and easy to manage even through our West Australian heatwaves.
Miriam, Perth.
Hi Tom, The system comes with a comprehensive installation manual that covers the set up and water balance.
If you don't have the manual please email info@enviroswim .com and we can send you a copy. Enviroswim works with all types of pool surfaces. In regards to maintaining the Quartzon surface I recommend you research the product on the internet or contact the manufacturer.
I am a builder and in the course of this year have built three pools in different houses, each one has used an enviroswim system. I even invited some clients to try our pool and their decision was made very quickly.
I love the low maintanence and simplicity of looking after our pool. The support and advice from Gary has been informative and very helpful.
I am only too pleased to recommend the ES3 to others who are in the process of putting in their own pools.
A great Australian product, well done Gary!
I am installing an ES 3 system for my estened pool (150.000 L) is there any special start up procedure to get the pool in balance - the pool uses a QuartzOn surface ?
Most cartridge filters don't have a backwash facility meaning the pool water never gets diluted to maintain water quality. In areas where the municipal supply water meets EPA drinking water standards the evaporation rate to dissolved solid ratio is not an issue as the top up water is not introducing more dissolved solids. PJ
Hi Rich, The Enviroswim system is compatible with all types of filters. I believe the reason for the sand filter recommendation was to encourage the use of backwashing and water recycling due to the poor water quality in parts of Phoenix.
The problem is that in some areas in the Phoenix valley the municipal supply water used to top up pool evaporation loss is high in dissolved solids like calcium. When water evaporates from the pool the dissolved solids don't evaporate so the dissolved solids gradually build up in the pool water like a thickening soup until the water becomes uncomfortable to swim in and pool management becomes difficult.
Start Prev 1 2 3 Next End